Professional Series Carb Spray Cleaner

Cleans carburettors, linkages and automatic chokes

Take Note!

Avoid spraying or dripping on exterior body paint, natural or synthetic plastics or rubbers. IMMEDIATELY flush with water if contact occurs. Can cause wax and paint streaking.

Cleans
Prevents dirt build up
Protects

Product Description

STP® Professional Heavy Duty Carb Spray Cleaner is designed to quickly remove gum, sludge, varnish, grease and dirt from carburettors linkage and automatic chokes. Regular usage of this carb cleaner spray will ensure prevention of dirt build up.

How it helps:

Prevents dirt from building up
Removes grease and dirt
Keeps carburettors linkage and automatic chokes clean

Usage Directions

With engine cool or only slightly warm, begin clean up.

FOR CARBURETTOR AND CARBURETTOR LINKAGE

Remove air cleaner and apply STP® Carb Spray Cleaner to entire exterior surface of the carburettor, including the linkage and choke (valve) shaft. Allow to soak for a minute and then re-apply to thoroughly remove dirt, grease and deposits.

FOR AUTOMATIC CHOKES

To thoroughly clean the automatic choke, spray both ends of the choke valve while opening and closing it by hand. Then spray vacuum cylinder to remove dirt and gum. Start the engine and apply STP® Carb Spray Cleaner in bursts around inside of carburettor throat to remove deposits from throttle plate area and other parts.

Usage Frequency: Use as required.